Source code for swauth.middleware

# Copyright (c) 2010-2012 OpenStack, LLC.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied.
# See the License for the specific language governing permissions and
# limitations under the License.

try:
    import simplejson as json
except ImportError:
    import json
from httplib import HTTPConnection, HTTPSConnection
from time import gmtime, strftime, time
from traceback import format_exc
from urllib import quote, unquote
from uuid import uuid4
from hashlib import md5, sha1
import hmac
import base64

from eventlet.timeout import Timeout
from eventlet import TimeoutError
from webob import Response, Request
from webob.exc import HTTPAccepted, HTTPBadRequest, HTTPConflict, \
    HTTPCreated, HTTPForbidden, HTTPMethodNotAllowed, HTTPMovedPermanently, \
    HTTPNoContent, HTTPNotFound, HTTPServiceUnavailable, HTTPUnauthorized

from swift.common.bufferedhttp import http_connect_raw as http_connect
from swift.common.middleware.acl import clean_acl, parse_acl, referrer_allowed
from swift.common.utils import cache_from_env, get_logger, get_remote_client, \
    split_path, TRUE_VALUES, urlparse
from swift.common.wsgi import make_pre_authed_request

import swauth.authtypes



[docs]class Swauth(object): """ Scalable authentication and authorization system that uses Swift as its backing store. :param app: The next WSGI app in the pipeline :param conf: The dict of configuration values """ def __init__(self, app, conf): self.app = app self.conf = conf self.logger = get_logger(conf, log_route='swauth') self.log_headers = conf.get('log_headers', 'no').lower() in TRUE_VALUES self.reseller_prefix = conf.get('reseller_prefix', 'AUTH').strip() if self.reseller_prefix and self.reseller_prefix[-1] != '_': self.reseller_prefix += '_' self.auth_prefix = conf.get('auth_prefix', '/auth/') if not self.auth_prefix: self.auth_prefix = '/auth/' if self.auth_prefix[0] != '/': self.auth_prefix = '/' + self.auth_prefix if self.auth_prefix[-1] != '/': self.auth_prefix += '/' self.swauth_remote = conf.get('swauth_remote') if self.swauth_remote: self.swauth_remote = self.swauth_remote.rstrip('/') if not self.swauth_remote: msg = _('Invalid swauth_remote set in conf file! Exiting.') try: self.logger.critical(msg) except Exception: pass raise ValueError(msg) self.swauth_remote_parsed = urlparse(self.swauth_remote) if self.swauth_remote_parsed.scheme not in ('http', 'https'): msg = _('Cannot handle protocol scheme %s for url %s!') % \ (self.swauth_remote_parsed.scheme, repr(self.swauth_remote)) try: self.logger.critical(msg) except Exception: pass raise ValueError(msg) self.swauth_remote_timeout = int(conf.get('swauth_remote_timeout', 10)) self.auth_account = '%s.auth' % self.reseller_prefix self.default_swift_cluster = conf.get('default_swift_cluster', 'local#http://127.0.0.1:8080/v1') # This setting is a little messy because of the options it has to # provide. The basic format is cluster_name#url, such as the default # value of local#http://127.0.0.1:8080/v1. # If the URL given to the user needs to differ from the url used by # Swauth to create/delete accounts, there's a more complex format: # cluster_name#url#url, such as # local#https://public.com:8080/v1#http://private.com:8080/v1. cluster_parts = self.default_swift_cluster.split('#', 2) self.dsc_name = cluster_parts[0] if len(cluster_parts) == 3: self.dsc_url = cluster_parts[1].rstrip('/') self.dsc_url2 = cluster_parts[2].rstrip('/') elif len(cluster_parts) == 2: self.dsc_url = self.dsc_url2 = cluster_parts[1].rstrip('/') else: raise Exception('Invalid cluster format') self.dsc_parsed = urlparse(self.dsc_url) if self.dsc_parsed.scheme not in ('http', 'https'): raise Exception('Cannot handle protocol scheme %s for url %s' % (self.dsc_parsed.scheme, repr(self.dsc_url))) self.dsc_parsed2 = urlparse(self.dsc_url2) if self.dsc_parsed2.scheme not in ('http', 'https'): raise Exception('Cannot handle protocol scheme %s for url %s' % (self.dsc_parsed2.scheme, repr(self.dsc_url2))) self.super_admin_key = conf.get('super_admin_key') if not self.super_admin_key and not self.swauth_remote: msg = _('No super_admin_key set in conf file; Swauth ' 'administration features will be disabled.') try: self.logger.warn(msg) except Exception: pass self.token_life = int(conf.get('token_life', 86400)) self.timeout = int(conf.get('node_timeout', 10)) self.itoken = None self.itoken_expires = None self.allowed_sync_hosts = [h.strip() for h in conf.get('allowed_sync_hosts', '127.0.0.1').split(',') if h.strip()] # Get an instance of our auth_type encoder for saving and checking the # user's key self.auth_type = conf.get('auth_type', 'Plaintext').title() self.auth_encoder = getattr(swauth.authtypes, self.auth_type, None) if self.auth_encoder is None: raise Exception('Invalid auth_type in config file: %s' % self.auth_type) self.auth_encoder.salt = conf.get('auth_type_salt', 'swauthsalt') self.allow_overrides = \ conf.get('allow_overrides', 't').lower() in TRUE_VALUES self.agent = '%(orig)s Swauth' def __call__(self, env, start_response): """ Accepts a standard WSGI application call, authenticating the request and installing callback hooks for authorization and ACL header validation. For an authenticated request, REMOTE_USER will be set to a comma separated list of the user's groups. With a non-empty reseller prefix, acts as the definitive auth service for just tokens and accounts that begin with that prefix, but will deny requests outside this prefix if no other auth middleware overrides it. With an empty reseller prefix, acts as the definitive auth service only for tokens that validate to a non-empty set of groups. For all other requests, acts as the fallback auth service when no other auth middleware overrides it. Alternatively, if the request matches the self.auth_prefix, the request will be routed through the internal auth request handler (self.handle). This is to handle creating users, accounts, granting tokens, etc. """ # We're going to consider OPTIONS requests harmless and the CORS # support in the Swift proxy needs to get them. if env.get('REQUEST_METHOD') == 'OPTIONS': return self.app(env, start_response) if self.allow_overrides and env.get('swift.authorize_override', False): return self.app(env, start_response) if not self.swauth_remote: if env.get('PATH_INFO', '') == self.auth_prefix[:-1]: return HTTPMovedPermanently(add_slash=True)(env, start_response) elif env.get('PATH_INFO', '').startswith(self.auth_prefix): return self.handle(env, start_response) s3 = env.get('HTTP_AUTHORIZATION') token = env.get('HTTP_X_AUTH_TOKEN', env.get('HTTP_X_STORAGE_TOKEN')) if token and len(token) > swauth.authtypes.MAX_TOKEN_LENGTH: return HTTPBadRequest(body='Token exceeds maximum length.')(env, start_response) if s3 or (token and token.startswith(self.reseller_prefix)): # Note: Empty reseller_prefix will match all tokens. groups = self.get_groups(env, token) if groups: env['REMOTE_USER'] = groups user = groups and groups.split(',', 1)[0] or '' # We know the proxy logs the token, so we augment it just a bit # to also log the authenticated user. env['HTTP_X_AUTH_TOKEN'] = \ '%s,%s' % (user, 's3' if s3 else token) env['swift.authorize'] = self.authorize env['swift.clean_acl'] = clean_acl else: # Unauthorized token if self.reseller_prefix and token and \ token.startswith(self.reseller_prefix): # Because I know I'm the definitive auth for this token, I # can deny it outright. return HTTPUnauthorized()(env, start_response) # Because I'm not certain if I'm the definitive auth, I won't # overwrite swift.authorize and I'll just set a delayed denial # if nothing else overrides me. elif 'swift.authorize' not in env: env['swift.authorize'] = self.denied_response else: if self.reseller_prefix: # With a non-empty reseller_prefix, I would like to be called # back for anonymous access to accounts I know I'm the # definitive auth for. try: version, rest = split_path(env.get('PATH_INFO', ''), 1, 2, True) except ValueError: version, rest = None, None if rest and rest.startswith(self.reseller_prefix): # Handle anonymous access to accounts I'm the definitive # auth for. env['swift.authorize'] = self.authorize env['swift.clean_acl'] = clean_acl # Not my token, not my account, I can't authorize this request, # deny all is a good idea if not already set... elif 'swift.authorize' not in env: env['swift.authorize'] = self.denied_response # Because I'm not certain if I'm the definitive auth for empty # reseller_prefixed accounts, I won't overwrite swift.authorize. elif 'swift.authorize' not in env: env['swift.authorize'] = self.authorize env['swift.clean_acl'] = clean_acl return self.app(env, start_response)
[docs] def get_groups(self, env, token): """ Get groups for the given token. :param env: The current WSGI environment dictionary. :param token: Token to validate and return a group string for. :returns: None if the token is invalid or a string containing a comma separated list of groups the authenticated user is a member of. The first group in the list is also considered a unique identifier for that user. """ groups = None memcache_client = cache_from_env(env) if memcache_client: memcache_key = '%s/auth/%s' % (self.reseller_prefix, token) cached_auth_data = memcache_client.get(memcache_key) if cached_auth_data: expires, groups = cached_auth_data if expires < time(): groups = None if env.get('HTTP_AUTHORIZATION'): if self.swauth_remote: # TODO: Support S3-style authorization with swauth_remote mode self.logger.warn('S3-style authorization not supported yet ' 'with swauth_remote mode.') return None try: account = env['HTTP_AUTHORIZATION'].split(' ')[1] account, user, sign = account.split(':') except Exception, err: self.logger.debug( 'Swauth cannot parse Authorization header value %r' % env['HTTP_AUTHORIZATION']) return None path = quote('/v1/%s/%s/%s' % (self.auth_account, account, user)) resp = make_pre_authed_request(env, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: return None if 'x-object-meta-account-id' in resp.headers: account_id = resp.headers['x-object-meta-account-id'] else: path = quote('/v1/%s/%s' % (self.auth_account, account)) resp2 = make_pre_authed_request(env, 'HEAD', path, agent=self.agent).get_response(self.app) if resp2.status_int // 100 != 2: return None account_id = resp2.headers['x-container-meta-account-id'] path = env['PATH_INFO'] env['PATH_INFO'] = path.replace("%s:%s" % (account, user), account_id, 1) detail = json.loads(resp.body) password = detail['auth'].split(':')[-1] msg = base64.urlsafe_b64decode(unquote(token)) s = base64.encodestring(hmac.new(password, msg, sha1).digest()).strip() if s != sign: return None groups = [g['name'] for g in detail['groups']] if '.admin' in groups: groups.remove('.admin') groups.append(account_id) groups = ','.join(groups) return groups if not groups: if self.swauth_remote: with Timeout(self.swauth_remote_timeout): conn = http_connect(self.swauth_remote_parsed.hostname, self.swauth_remote_parsed.port, 'GET', '%s/v2/.token/%s' % (self.swauth_remote_parsed.path, quote(token)), ssl=(self.swauth_remote_parsed.scheme == 'https')) resp = conn.getresponse() resp.read() conn.close() if resp.status // 100 != 2: return None expires_from_now = float(resp.getheader('x-auth-ttl')) groups = resp.getheader('x-auth-groups') if memcache_client: memcache_client.set(memcache_key, (time() + expires_from_now, groups), timeout=expires_from_now) else: path = quote('/v1/%s/.token_%s/%s' % (self.auth_account, token[-1], token)) resp = make_pre_authed_request(env, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: return None detail = json.loads(resp.body) if detail['expires'] < time(): make_pre_authed_request(env, 'DELETE', path, agent=self.agent).get_response(self.app) return None groups = [g['name'] for g in detail['groups']] if '.admin' in groups: groups.remove('.admin') groups.append(detail['account_id']) groups = ','.join(groups) if memcache_client: memcache_client.set(memcache_key, (detail['expires'], groups), timeout=float(detail['expires'] - time())) return groups
[docs] def authorize(self, req): """ Returns None if the request is authorized to continue or a standard WSGI response callable if not. """ try: version, account, container, obj = split_path(req.path, 1, 4, True) except ValueError: return HTTPNotFound(request=req) if not account or not account.startswith(self.reseller_prefix): return self.denied_response(req) user_groups = (req.remote_user or '').split(',') if '.reseller_admin' in user_groups and \ account != self.reseller_prefix and \ account[len(self.reseller_prefix)] != '.': req.environ['swift_owner'] = True return None if account in user_groups and \ (req.method not in ('DELETE', 'PUT') or container): # If the user is admin for the account and is not trying to do an # account DELETE or PUT... req.environ['swift_owner'] = True return None if (req.environ.get('swift_sync_key') and req.environ['swift_sync_key'] == req.headers.get('x-container-sync-key', None) and 'x-timestamp' in req.headers and (req.remote_addr in self.allowed_sync_hosts or get_remote_client(req) in self.allowed_sync_hosts)): return None referrers, groups = parse_acl(getattr(req, 'acl', None)) if referrer_allowed(req.referer, referrers): if obj or '.rlistings' in groups: return None return self.denied_response(req) if not req.remote_user: return self.denied_response(req) for user_group in user_groups: if user_group in groups: return None return self.denied_response(req)
[docs] def denied_response(self, req): """ Returns a standard WSGI response callable with the status of 403 or 401 depending on whether the REMOTE_USER is set or not. """ if req.remote_user: return HTTPForbidden(request=req) else: return HTTPUnauthorized(request=req)
[docs] def handle(self, env, start_response): """ WSGI entry point for auth requests (ones that match the self.auth_prefix). Wraps env in webob.Request object and passes it down. :param env: WSGI environment dictionary :param start_response: WSGI callable """ try: req = Request(env) if self.auth_prefix: req.path_info_pop() req.bytes_transferred = '-' req.client_disconnect = False if 'x-storage-token' in req.headers and \ 'x-auth-token' not in req.headers: req.headers['x-auth-token'] = req.headers['x-storage-token'] if 'eventlet.posthooks' in env: env['eventlet.posthooks'].append( (self.posthooklogger, (req,), {})) return self.handle_request(req)(env, start_response) else: # Lack of posthook support means that we have to log on the # start of the response, rather than after all the data has # been sent. This prevents logging client disconnects # differently than full transmissions. response = self.handle_request(req)(env, start_response) self.posthooklogger(env, req) return response except (Exception, TimeoutError): print "EXCEPTION IN handle: %s: %s" % (format_exc(), env) start_response('500 Server Error', [('Content-Type', 'text/plain')]) return ['Internal server error.\n']
[docs] def handle_request(self, req): """ Entry point for auth requests (ones that match the self.auth_prefix). Should return a WSGI-style callable (such as webob.Response). :param req: webob.Request object """ req.start_time = time() handler = None try: version, account, user, _junk = split_path(req.path_info, minsegs=0, maxsegs=4, rest_with_last=True) except ValueError: return HTTPNotFound(request=req) if version in ('v1', 'v1.0', 'auth'): if req.method == 'GET': handler = self.handle_get_token elif version == 'v2': if not self.super_admin_key: return HTTPNotFound(request=req) req.path_info_pop() if req.method == 'GET': if not account and not user: handler = self.handle_get_reseller elif account: if not user: handler = self.handle_get_account elif account == '.token': req.path_info_pop() handler = self.handle_validate_token else: handler = self.handle_get_user elif req.method == 'PUT': if not user: handler = self.handle_put_account else: handler = self.handle_put_user elif req.method == 'DELETE': if not user: handler = self.handle_delete_account else: handler = self.handle_delete_user elif req.method == 'POST': if account == '.prep': handler = self.handle_prep elif user == '.services': handler = self.handle_set_services else: handler = self.handle_webadmin if not handler: req.response = HTTPBadRequest(request=req) else: req.response = handler(req) return req.response
[docs] def handle_webadmin(self, req): if req.method not in ('GET', 'HEAD'): return HTTPMethodNotAllowed(request=req) subpath = req.path[len(self.auth_prefix):] or 'index.html' path = quote('/v1/%s/.webadmin/%s' % (self.auth_account, subpath)) req.response = make_pre_authed_request(req.environ, req.method, path, agent=self.agent).get_response(self.app) return req.response
[docs] def handle_prep(self, req): """ Handles the POST v2/.prep call for preparing the backing store Swift cluster for use with the auth subsystem. Can only be called by .super_admin. :param req: The webob.Request to process. :returns: webob.Response, 204 on success """ if not self.is_super_admin(req): return HTTPForbidden(request=req) path = quote('/v1/%s' % self.auth_account) resp = make_pre_authed_request(req.environ, 'PUT', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not create the main auth account: %s %s' % (path, resp.status)) path = quote('/v1/%s/.account_id' % self.auth_account) resp = make_pre_authed_request(req.environ, 'PUT', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not create container: %s %s' % (path, resp.status)) for container in xrange(16): path = quote('/v1/%s/.token_%x' % (self.auth_account, container)) resp = make_pre_authed_request(req.environ, 'PUT', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not create container: %s %s' % (path, resp.status)) return HTTPNoContent(request=req)
[docs] def handle_get_reseller(self, req): """ Handles the GET v2 call for getting general reseller information (currently just a list of accounts). Can only be called by a .reseller_admin. On success, a JSON dictionary will be returned with a single `accounts` key whose value is list of dicts. Each dict represents an account and currently only contains the single key `name`. For example:: {"accounts": [{"name": "reseller"}, {"name": "test"}, {"name": "test2"}]} :param req: The webob.Request to process. :returns: webob.Response, 2xx on success with a JSON dictionary as explained above. """ if not self.is_reseller_admin(req): return HTTPForbidden(request=req) listing = [] marker = '' while True: path = '/v1/%s?format=json&marker=%s' % (quote(self.auth_account), quote(marker)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not list main auth account: %s %s' % (path, resp.status)) sublisting = json.loads(resp.body) if not sublisting: break for container in sublisting: if container['name'][0] != '.': listing.append({'name': container['name']}) marker = sublisting[-1]['name'].encode('utf-8') return Response(body=json.dumps({'accounts': listing}))
[docs] def handle_get_account(self, req): """ Handles the GET v2/<account> call for getting account information. Can only be called by an account .admin. On success, a JSON dictionary will be returned containing the keys `account_id`, `services`, and `users`. The `account_id` is the value used when creating service accounts. The `services` value is a dict as described in the :func:`handle_get_token` call. The `users` value is a list of dicts, each dict representing a user and currently only containing the single key `name`. For example:: {"account_id": "AUTH_018c3946-23f8-4efb-a8fb-b67aae8e4162", "services": {"storage": {"default": "local", "local": "http://127.0.0.1:8080/v1/AUTH_018c3946"}}, "users": [{"name": "tester"}, {"name": "tester3"}]} :param req: The webob.Request to process. :returns: webob.Response, 2xx on success with a JSON dictionary as explained above. """ account = req.path_info_pop() if req.path_info or not account or account[0] == '.': return HTTPBadRequest(request=req) if not self.is_account_admin(req, account): return HTTPForbidden(request=req) path = quote('/v1/%s/%s/.services' % (self.auth_account, account)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int == 404: return HTTPNotFound(request=req) if resp.status_int // 100 != 2: raise Exception('Could not obtain the .services object: %s %s' % (path, resp.status)) services = json.loads(resp.body) listing = [] marker = '' while True: path = '/v1/%s?format=json&marker=%s' % (quote('%s/%s' % (self.auth_account, account)), quote(marker)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int == 404: return HTTPNotFound(request=req) if resp.status_int // 100 != 2: raise Exception('Could not list in main auth account: %s %s' % (path, resp.status)) account_id = resp.headers['X-Container-Meta-Account-Id'] sublisting = json.loads(resp.body) if not sublisting: break for obj in sublisting: if obj['name'][0] != '.': listing.append({'name': obj['name']}) marker = sublisting[-1]['name'].encode('utf-8') return Response(body=json.dumps({'account_id': account_id, 'services': services, 'users': listing}))
[docs] def handle_set_services(self, req): """ Handles the POST v2/<account>/.services call for setting services information. Can only be called by a reseller .admin. In the :func:`handle_get_account` (GET v2/<account>) call, a section of the returned JSON dict is `services`. This section looks something like this:: "services": {"storage": {"default": "local", "local": "http://127.0.0.1:8080/v1/AUTH_018c3946"}} Making use of this section is described in :func:`handle_get_token`. This function allows setting values within this section for the <account>, allowing the addition of new service end points or updating existing ones. The body of the POST request should contain a JSON dict with the following format:: {"service_name": {"end_point_name": "end_point_value"}} There can be multiple services and multiple end points in the same call. Any new services or end points will be added to the existing set of services and end points. Any existing services with the same service name will be merged with the new end points. Any existing end points with the same end point name will have their values updated. The updated services dictionary will be returned on success. :param req: The webob.Request to process. :returns: webob.Response, 2xx on success with the udpated services JSON dict as described above """ if not self.is_reseller_admin(req): return HTTPForbidden(request=req) account = req.path_info_pop() if req.path_info != '/.services' or not account or account[0] == '.': return HTTPBadRequest(request=req) try: new_services = json.loads(req.body) except ValueError, err: return HTTPBadRequest(body=str(err)) # Get the current services information path = quote('/v1/%s/%s/.services' % (self.auth_account, account)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int == 404: return HTTPNotFound(request=req) if resp.status_int // 100 != 2: raise Exception('Could not obtain services info: %s %s' % (path, resp.status)) services = json.loads(resp.body) for new_service, value in new_services.iteritems(): if new_service in services: services[new_service].update(value) else: services[new_service] = value # Save the new services information services = json.dumps(services) resp = make_pre_authed_request(req.environ, 'PUT', path, services, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not save .services object: %s %s' % (path, resp.status)) return Response(request=req, body=services)
[docs] def handle_put_account(self, req): """ Handles the PUT v2/<account> call for adding an account to the auth system. Can only be called by a .reseller_admin. By default, a newly created UUID4 will be used with the reseller prefix as the account id used when creating corresponding service accounts. However, you can provide an X-Account-Suffix header to replace the UUID4 part. :param req: The webob.Request to process. :returns: webob.Response, 2xx on success. """ if not self.is_reseller_admin(req): return HTTPForbidden(request=req) account = req.path_info_pop() if req.path_info or not account or account[0] == '.': return HTTPBadRequest(request=req) # Ensure the container in the main auth account exists (this # container represents the new account) path = quote('/v1/%s/%s' % (self.auth_account, account)) resp = make_pre_authed_request(req.environ, 'HEAD', path, agent=self.agent).get_response(self.app) if resp.status_int == 404: resp = make_pre_authed_request(req.environ, 'PUT', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not create account within main auth ' 'account: %s %s' % (path, resp.status)) elif resp.status_int // 100 == 2: if 'x-container-meta-account-id' in resp.headers: # Account was already created return HTTPAccepted(request=req) else: raise Exception('Could not verify account within main auth ' 'account: %s %s' % (path, resp.status)) account_suffix = req.headers.get('x-account-suffix') if not account_suffix: account_suffix = str(uuid4()) # Create the new account in the Swift cluster path = quote('%s/%s%s' % (self.dsc_parsed2.path, self.reseller_prefix, account_suffix)) try: conn = self.get_conn() conn.request('PUT', path, headers={'X-Auth-Token': self.get_itoken(req.environ)}) resp = conn.getresponse() resp.read() if resp.status // 100 != 2: raise Exception('Could not create account on the Swift ' 'cluster: %s %s %s' % (path, resp.status, resp.reason)) except (Exception, TimeoutError): self.logger.error(_('ERROR: Exception while trying to communicate ' 'with %(scheme)s://%(host)s:%(port)s/%(path)s'), {'scheme': self.dsc_parsed2.scheme, 'host': self.dsc_parsed2.hostname, 'port': self.dsc_parsed2.port, 'path': path}) raise # Record the mapping from account id back to account name path = quote('/v1/%s/.account_id/%s%s' % (self.auth_account, self.reseller_prefix, account_suffix)) resp = make_pre_authed_request(req.environ, 'PUT', path, account, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not create account id mapping: %s %s' % (path, resp.status)) # Record the cluster url(s) for the account path = quote('/v1/%s/%s/.services' % (self.auth_account, account)) services = {'storage': {}} services['storage'][self.dsc_name] = '%s/%s%s' % (self.dsc_url, self.reseller_prefix, account_suffix) services['storage']['default'] = self.dsc_name resp = make_pre_authed_request(req.environ, 'PUT', path, json.dumps(services), agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not create .services object: %s %s' % (path, resp.status)) # Record the mapping from account name to the account id path = quote('/v1/%s/%s' % (self.auth_account, account)) resp = make_pre_authed_request(req.environ, 'POST', path, headers={'X-Container-Meta-Account-Id': '%s%s' % (self.reseller_prefix, account_suffix)}, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not record the account id on the account: ' '%s %s' % (path, resp.status)) return HTTPCreated(request=req)
[docs] def handle_delete_account(self, req): """ Handles the DELETE v2/<account> call for removing an account from the auth system. Can only be called by a .reseller_admin. :param req: The webob.Request to process. :returns: webob.Response, 2xx on success. """ if not self.is_reseller_admin(req): return HTTPForbidden(request=req) account = req.path_info_pop() if req.path_info or not account or account[0] == '.': return HTTPBadRequest(request=req) # Make sure the account has no users and get the account_id marker = '' while True: path = '/v1/%s?format=json&marker=%s' % (quote('%s/%s' % (self.auth_account, account)), quote(marker)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int == 404: return HTTPNotFound(request=req) if resp.status_int // 100 != 2: raise Exception('Could not list in main auth account: %s %s' % (path, resp.status)) account_id = resp.headers['x-container-meta-account-id'] sublisting = json.loads(resp.body) if not sublisting: break for obj in sublisting: if obj['name'][0] != '.': return HTTPConflict(request=req) marker = sublisting[-1]['name'].encode('utf-8') # Obtain the listing of services the account is on. path = quote('/v1/%s/%s/.services' % (self.auth_account, account)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2 and resp.status_int != 404: raise Exception('Could not obtain .services object: %s %s' % (path, resp.status)) if resp.status_int // 100 == 2: services = json.loads(resp.body) # Delete the account on each cluster it is on. deleted_any = False for name, url in services['storage'].iteritems(): if name != 'default': parsed = urlparse(url) conn = self.get_conn(parsed) conn.request('DELETE', parsed.path, headers={'X-Auth-Token': self.get_itoken(req.environ)}) resp = conn.getresponse() resp.read() if resp.status == 409: if deleted_any: raise Exception('Managed to delete one or more ' 'service end points, but failed with: ' '%s %s %s' % (url, resp.status, resp.reason)) else: return HTTPConflict(request=req) if resp.status // 100 != 2 and resp.status != 404: raise Exception('Could not delete account on the ' 'Swift cluster: %s %s %s' % (url, resp.status, resp.reason)) deleted_any = True # Delete the .services object itself. path = quote('/v1/%s/%s/.services' % (self.auth_account, account)) resp = make_pre_authed_request(req.environ, 'DELETE', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2 and resp.status_int != 404: raise Exception('Could not delete .services object: %s %s' % (path, resp.status)) # Delete the account id mapping for the account. path = quote('/v1/%s/.account_id/%s' % (self.auth_account, account_id)) resp = make_pre_authed_request(req.environ, 'DELETE', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2 and resp.status_int != 404: raise Exception('Could not delete account id mapping: %s %s' % (path, resp.status)) # Delete the account marker itself. path = quote('/v1/%s/%s' % (self.auth_account, account)) resp = make_pre_authed_request(req.environ, 'DELETE', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2 and resp.status_int != 404: raise Exception('Could not delete account marked: %s %s' % (path, resp.status)) return HTTPNoContent(request=req)
[docs] def handle_get_user(self, req): """ Handles the GET v2/<account>/<user> call for getting user information. Can only be called by an account .admin. On success, a JSON dict will be returned as described:: {"groups": [ # List of groups the user is a member of {"name": "<act>:<usr>"}, # The first group is a unique user identifier {"name": "<account>"}, # The second group is the auth account name {"name": "<additional-group>"} # There may be additional groups, .admin being a special # group indicating an account admin and .reseller_admin # indicating a reseller admin. ], "auth": "plaintext:<key>" # The auth-type and key for the user; currently only plaintext is # implemented. } For example:: {"groups": [{"name": "test:tester"}, {"name": "test"}, {"name": ".admin"}], "auth": "plaintext:testing"} If the <user> in the request is the special user `.groups`, the JSON dict will contain a single key of `groups` whose value is a list of dicts representing the active groups within the account. Each dict currently has the single key `name`. For example:: {"groups": [{"name": ".admin"}, {"name": "test"}, {"name": "test:tester"}, {"name": "test:tester3"}]} :param req: The webob.Request to process. :returns: webob.Response, 2xx on success with a JSON dictionary as explained above. """ account = req.path_info_pop() user = req.path_info_pop() if req.path_info or not account or account[0] == '.' or not user or \ (user[0] == '.' and user != '.groups'): return HTTPBadRequest(request=req) if not self.is_account_admin(req, account): return HTTPForbidden(request=req) if user == '.groups': # TODO: This could be very slow for accounts with a really large # number of users. Speed could be improved by concurrently # requesting user group information. Then again, I don't *know* # it's slow for `normal` use cases, so testing should be done. groups = set() marker = '' while True: path = '/v1/%s?format=json&marker=%s' % (quote('%s/%s' % (self.auth_account, account)), quote(marker)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int == 404: return HTTPNotFound(request=req) if resp.status_int // 100 != 2: raise Exception('Could not list in main auth account: ' '%s %s' % (path, resp.status)) sublisting = json.loads(resp.body) if not sublisting: break for obj in sublisting: if obj['name'][0] != '.': path = quote('/v1/%s/%s/%s' % (self.auth_account, account, obj['name'])) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not retrieve user object: ' '%s %s' % (path, resp.status)) groups.update(g['name'] for g in json.loads(resp.body)['groups']) marker = sublisting[-1]['name'].encode('utf-8') body = json.dumps({'groups': [{'name': g} for g in sorted(groups)]}) else: path = quote('/v1/%s/%s/%s' % (self.auth_account, account, user)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int == 404: return HTTPNotFound(request=req) if resp.status_int // 100 != 2: raise Exception('Could not retrieve user object: %s %s' % (path, resp.status)) body = resp.body display_groups = [g['name'] for g in json.loads(body)['groups']] if ('.admin' in display_groups and not self.is_reseller_admin(req)) or \ ('.reseller_admin' in display_groups and not self.is_super_admin(req)): return HTTPForbidden(request=req) return Response(body=body)
[docs] def handle_put_user(self, req): """ Handles the PUT v2/<account>/<user> call for adding a user to an account. X-Auth-User-Key represents the user's key (url encoded), X-Auth-User-Admin may be set to `true` to create an account .admin, and X-Auth-User-Reseller-Admin may be set to `true` to create a .reseller_admin. Can only be called by an account .admin unless the user is to be a .reseller_admin, in which case the request must be by .super_admin. :param req: The webob.Request to process. :returns: webob.Response, 2xx on success. """ # Validate path info account = req.path_info_pop() user = req.path_info_pop() key = unquote(req.headers.get('x-auth-user-key', '')) admin = req.headers.get('x-auth-user-admin') == 'true' reseller_admin = \ req.headers.get('x-auth-user-reseller-admin') == 'true' if reseller_admin: admin = True if req.path_info or not account or account[0] == '.' or not user or \ user[0] == '.' or not key: return HTTPBadRequest(request=req) if reseller_admin: if not self.is_super_admin(req): return HTTPForbidden(request=req) elif not self.is_account_admin(req, account): return HTTPForbidden(request=req) path = quote('/v1/%s/%s' % (self.auth_account, account)) resp = make_pre_authed_request(req.environ, 'HEAD', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not retrieve account id value: %s %s' % (path, resp.status)) headers = {'X-Object-Meta-Account-Id': resp.headers['x-container-meta-account-id']} # Create the object in the main auth account (this object represents # the user) path = quote('/v1/%s/%s/%s' % (self.auth_account, account, user)) groups = ['%s:%s' % (account, user), account] if admin: groups.append('.admin') if reseller_admin: groups.append('.reseller_admin') auth_value = self.auth_encoder().encode(key) resp = make_pre_authed_request(req.environ, 'PUT', path, json.dumps({'auth': auth_value, 'groups': [{'name': g} for g in groups]}), headers=headers, agent=self.agent).get_response(self.app) if resp.status_int == 404: return HTTPNotFound(request=req) if resp.status_int // 100 != 2: raise Exception('Could not create user object: %s %s' % (path, resp.status)) return HTTPCreated(request=req)
[docs] def handle_delete_user(self, req): """ Handles the DELETE v2/<account>/<user> call for deleting a user from an account. Can only be called by an account .admin. :param req: The webob.Request to process. :returns: webob.Response, 2xx on success. """ # Validate path info account = req.path_info_pop() user = req.path_info_pop() if req.path_info or not account or account[0] == '.' or not user or \ user[0] == '.': return HTTPBadRequest(request=req) if not self.is_account_admin(req, account): return HTTPForbidden(request=req) # Delete the user's existing token, if any. path = quote('/v1/%s/%s/%s' % (self.auth_account, account, user)) resp = make_pre_authed_request(req.environ, 'HEAD', path, agent=self.agent).get_response(self.app) if resp.status_int == 404: return HTTPNotFound(request=req) elif resp.status_int // 100 != 2: raise Exception('Could not obtain user details: %s %s' % (path, resp.status)) candidate_token = resp.headers.get('x-object-meta-auth-token') if candidate_token: path = quote('/v1/%s/.token_%s/%s' % (self.auth_account, candidate_token[-1], candidate_token)) resp = make_pre_authed_request(req.environ, 'DELETE', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2 and resp.status_int != 404: raise Exception('Could not delete possibly existing token: ' '%s %s' % (path, resp.status)) # Delete the user entry itself. path = quote('/v1/%s/%s/%s' % (self.auth_account, account, user)) resp = make_pre_authed_request(req.environ, 'DELETE', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2 and resp.status_int != 404: raise Exception('Could not delete the user object: %s %s' % (path, resp.status)) return HTTPNoContent(request=req)
[docs] def handle_get_token(self, req): """ Handles the various `request for token and service end point(s)` calls. There are various formats to support the various auth servers in the past. Examples:: GET <auth-prefix>/v1/<act>/auth X-Auth-User: <act>:<usr> or X-Storage-User: <usr> X-Auth-Key: <key> or X-Storage-Pass: <key> GET <auth-prefix>/auth X-Auth-User: <act>:<usr> or X-Storage-User: <act>:<usr> X-Auth-Key: <key> or X-Storage-Pass: <key> GET <auth-prefix>/v1.0 X-Auth-User: <act>:<usr> or X-Storage-User: <act>:<usr> X-Auth-Key: <key> or X-Storage-Pass: <key> Values should be url encoded, "act%3Ausr" instead of "act:usr" for example; however, for backwards compatibility the colon may be included unencoded. On successful authentication, the response will have X-Auth-Token and X-Storage-Token set to the token to use with Swift and X-Storage-URL set to the URL to the default Swift cluster to use. The response body will be set to the account's services JSON object as described here:: {"storage": { # Represents the Swift storage service end points "default": "cluster1", # Indicates which cluster is the default "cluster1": "<URL to use with Swift>", # A Swift cluster that can be used with this account, # "cluster1" is the name of the cluster which is usually a # location indicator (like "dfw" for a datacenter region). "cluster2": "<URL to use with Swift>" # Another Swift cluster that can be used with this account, # there will always be at least one Swift cluster to use or # this whole "storage" dict won't be included at all. }, "servers": { # Represents the Nova server service end points # Expected to be similar to the "storage" dict, but not # implemented yet. }, # Possibly other service dicts, not implemented yet. } :param req: The webob.Request to process. :returns: webob.Response, 2xx on success with data set as explained above. """ # Validate the request info try: pathsegs = split_path(req.path_info, minsegs=1, maxsegs=3, rest_with_last=True) except ValueError: return HTTPNotFound(request=req) if pathsegs[0] == 'v1' and pathsegs[2] == 'auth': account = pathsegs[1] user = req.headers.get('x-storage-user') if not user: user = unquote(req.headers.get('x-auth-user', '')) if not user or ':' not in user: return HTTPUnauthorized(request=req) account2, user = user.split(':', 1) if account != account2: return HTTPUnauthorized(request=req) key = req.headers.get('x-storage-pass') if not key: key = unquote(req.headers.get('x-auth-key', '')) elif pathsegs[0] in ('auth', 'v1.0'): user = unquote(req.headers.get('x-auth-user', '')) if not user: user = req.headers.get('x-storage-user') if not user or ':' not in user: return HTTPUnauthorized(request=req) account, user = user.split(':', 1) key = unquote(req.headers.get('x-auth-key', '')) if not key: key = req.headers.get('x-storage-pass') else: return HTTPBadRequest(request=req) if not all((account, user, key)): return HTTPUnauthorized(request=req) if user == '.super_admin' and self.super_admin_key and \ key == self.super_admin_key: token = self.get_itoken(req.environ) url = '%s/%s.auth' % (self.dsc_url, self.reseller_prefix) return Response(request=req, body=json.dumps({'storage': {'default': 'local', 'local': url}}), headers={'x-auth-token': token, 'x-storage-token': token, 'x-storage-url': url}) # Authenticate user path = quote('/v1/%s/%s/%s' % (self.auth_account, account, user)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int == 404: return HTTPUnauthorized(request=req) if resp.status_int // 100 != 2: raise Exception('Could not obtain user details: %s %s' % (path, resp.status)) user_detail = json.loads(resp.body) if not self.credentials_match(user_detail, key): return HTTPUnauthorized(request=req) # See if a token already exists and hasn't expired token = None candidate_token = resp.headers.get('x-object-meta-auth-token') if candidate_token: path = quote('/v1/%s/.token_%s/%s' % (self.auth_account, candidate_token[-1], candidate_token)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 == 2: token_detail = json.loads(resp.body) if token_detail['expires'] > time(): token = candidate_token else: make_pre_authed_request(req.environ, 'DELETE', path, agent=self.agent).get_response(self.app) elif resp.status_int != 404: raise Exception('Could not detect whether a token already ' 'exists: %s %s' % (path, resp.status)) # Create a new token if one didn't exist if not token: # Retrieve account id, we'll save this in the token path = quote('/v1/%s/%s' % (self.auth_account, account)) resp = make_pre_authed_request(req.environ, 'HEAD', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not retrieve account id value: ' '%s %s' % (path, resp.status)) account_id = \ resp.headers['x-container-meta-account-id'] # Generate new token token = '%stk%s' % (self.reseller_prefix, uuid4().hex) # Save token info path = quote('/v1/%s/.token_%s/%s' % (self.auth_account, token[-1], token)) resp = make_pre_authed_request(req.environ, 'PUT', path, json.dumps({'account': account, 'user': user, 'account_id': account_id, 'groups': user_detail['groups'], 'expires': time() + self.token_life}), agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not create new token: %s %s' % (path, resp.status)) # Record the token with the user info for future use. path = quote('/v1/%s/%s/%s' % (self.auth_account, account, user)) resp = make_pre_authed_request(req.environ, 'POST', path, headers={'X-Object-Meta-Auth-Token': token}, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not save new token: %s %s' % (path, resp.status)) # Get the services information path = quote('/v1/%s/%s/.services' % (self.auth_account, account)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: raise Exception('Could not obtain services info: %s %s' % (path, resp.status)) detail = json.loads(resp.body) url = detail['storage'][detail['storage']['default']] return Response(request=req, body=resp.body, headers={'x-auth-token': token, 'x-storage-token': token, 'x-storage-url': url})
[docs] def handle_validate_token(self, req): """ Handles the GET v2/.token/<token> call for validating a token, usually called by a service like Swift. On a successful validation, X-Auth-TTL will be set for how much longer this token is valid and X-Auth-Groups will contain a comma separated list of groups the user belongs to. The first group listed will be a unique identifier for the user the token represents. .reseller_admin is a special group that indicates the user should be allowed to do anything on any account. :param req: The webob.Request to process. :returns: webob.Response, 2xx on success with data set as explained above. """ token = req.path_info_pop() if req.path_info or not token.startswith(self.reseller_prefix): return HTTPBadRequest(request=req) expires = groups = None memcache_client = cache_from_env(req.environ) if memcache_client: memcache_key = '%s/auth/%s' % (self.reseller_prefix, token) cached_auth_data = memcache_client.get(memcache_key) if cached_auth_data: expires, groups = cached_auth_data if expires < time(): groups = None if not groups: path = quote('/v1/%s/.token_%s/%s' % (self.auth_account, token[-1], token)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int // 100 != 2: return HTTPNotFound(request=req) detail = json.loads(resp.body) expires = detail['expires'] if expires < time(): make_pre_authed_request(req.environ, 'DELETE', path, agent=self.agent).get_response(self.app) return HTTPNotFound(request=req) groups = [g['name'] for g in detail['groups']] if '.admin' in groups: groups.remove('.admin') groups.append(detail['account_id']) groups = ','.join(groups) return HTTPNoContent(headers={'X-Auth-TTL': expires - time(), 'X-Auth-Groups': groups})
[docs] def get_conn(self, urlparsed=None): """ Returns an HTTPConnection based on the urlparse result given or the default Swift cluster (internal url) urlparse result. :param urlparsed: The result from urlparse.urlparse or None to use the default Swift cluster's value """ if not urlparsed: urlparsed = self.dsc_parsed2 if urlparsed.scheme == 'http': return HTTPConnection(urlparsed.netloc) else: return HTTPSConnection(urlparsed.netloc)
[docs] def get_itoken(self, env): """ Returns the current internal token to use for the auth system's own actions with other services. Each process will create its own itoken and the token will be deleted and recreated based on the token_life configuration value. The itoken information is stored in memcache because the auth process that is asked by Swift to validate the token may not be the same as the auth process that created the token. """ if not self.itoken or self.itoken_expires < time(): self.itoken = '%sitk%s' % (self.reseller_prefix, uuid4().hex) memcache_key = '%s/auth/%s' % (self.reseller_prefix, self.itoken) self.itoken_expires = time() + self.token_life - 60 memcache_client = cache_from_env(env) if not memcache_client: raise Exception( 'No memcache set up; required for Swauth middleware') memcache_client.set(memcache_key, (self.itoken_expires, '.auth,.reseller_admin,%s.auth' % self.reseller_prefix), timeout=self.token_life) return self.itoken
[docs] def get_admin_detail(self, req): """ Returns the dict for the user specified as the admin in the request with the addition of an `account` key set to the admin user's account. :param req: The webob request to retrieve X-Auth-Admin-User and X-Auth-Admin-Key from. :returns: The dict for the admin user with the addition of the `account` key. """ if ':' not in req.headers.get('x-auth-admin-user', ''): return None admin_account, admin_user = \ req.headers.get('x-auth-admin-user').split(':', 1) path = quote('/v1/%s/%s/%s' % (self.auth_account, admin_account, admin_user)) resp = make_pre_authed_request(req.environ, 'GET', path, agent=self.agent).get_response(self.app) if resp.status_int == 404: return None if resp.status_int // 100 != 2: raise Exception('Could not get admin user object: %s %s' % (path, resp.status)) admin_detail = json.loads(resp.body) admin_detail['account'] = admin_account return admin_detail
[docs] def credentials_match(self, user_detail, key): """ Returns True if the key is valid for the user_detail. It will use self.auth_encoder to check for a key match. :param user_detail: The dict for the user. :param key: The key to validate for the user. :returns: True if the key is valid for the user, False if not. """ return user_detail and self.auth_encoder().match( key, user_detail.get('auth'))
[docs] def is_super_admin(self, req): """ Returns True if the admin specified in the request represents the .super_admin. :param req: The webob.Request to check. :param returns: True if .super_admin. """ return req.headers.get('x-auth-admin-user') == '.super_admin' and \ self.super_admin_key and \ req.headers.get('x-auth-admin-key') == self.super_admin_key
[docs] def is_reseller_admin(self, req, admin_detail=None): """ Returns True if the admin specified in the request represents a .reseller_admin. :param req: The webob.Request to check. :param admin_detail: The previously retrieved dict from :func:`get_admin_detail` or None for this function to retrieve the admin_detail itself. :param returns: True if .reseller_admin. """ if self.is_super_admin(req): return True if not admin_detail: admin_detail = self.get_admin_detail(req) if not self.credentials_match(admin_detail, req.headers.get('x-auth-admin-key')): return False return '.reseller_admin' in (g['name'] for g in admin_detail['groups'])
[docs] def is_account_admin(self, req, account): """ Returns True if the admin specified in the request represents a .admin for the account specified. :param req: The webob.Request to check. :param account: The account to check for .admin against. :param returns: True if .admin. """ if self.is_super_admin(req): return True admin_detail = self.get_admin_detail(req) if admin_detail: if self.is_reseller_admin(req, admin_detail=admin_detail): return True if not self.credentials_match(admin_detail, req.headers.get('x-auth-admin-key')): return False return admin_detail and admin_detail['account'] == account and \ '.admin' in (g['name'] for g in admin_detail['groups']) return False
[docs] def posthooklogger(self, env, req): if not req.path.startswith(self.auth_prefix): return response = getattr(req, 'response', None) if not response: return trans_time = '%.4f' % (time() - req.start_time) the_request = quote(unquote(req.path)) if req.query_string: the_request = the_request + '?' + req.query_string # remote user for zeus client = req.headers.get('x-cluster-client-ip') if not client and 'x-forwarded-for' in req.headers: # remote user for other lbs client = req.headers['x-forwarded-for'].split(',')[0].strip() logged_headers = None if self.log_headers: logged_headers = '\n'.join('%s: %s' % (k, v) for k, v in req.headers.items()) status_int = response.status_int if getattr(req, 'client_disconnect', False) or \ getattr(response, 'client_disconnect', False): status_int = 499 self.logger.info(' '.join(quote(str(x)) for x in (client or '-', req.remote_addr or '-', strftime('%d/%b/%Y/%H/%M/%S', gmtime()), req.method, the_request, req.environ['SERVER_PROTOCOL'], status_int, req.referer or '-', req.user_agent or '-', req.headers.get('x-auth-token', req.headers.get('x-auth-admin-user', '-')), getattr(req, 'bytes_transferred', 0) or '-', getattr(response, 'bytes_transferred', 0) or '-', req.headers.get('etag', '-'), req.headers.get('x-trans-id', '-'), logged_headers or '-', trans_time)))
[docs]def filter_factory(global_conf, **local_conf): """Returns a WSGI filter app for use with paste.deploy.""" conf = global_conf.copy() conf.update(local_conf) def auth_filter(app): return Swauth(app, conf) return auth_filter